Model of stainless steel camera pole with stainless steel camera 2 3 4 5 6 meters high .

201 304 316 stainless steel camera pole model with camera installation column height from 2 3 4 5 6 meters. TinTa received the processing of stainless steel column models to install cameras , the size of camera columns as customers choose to buy. The process of processing the stainless steel column sample with the tinta stainless steel camera will smooth the two ends of the bent pipe bill to ensure that the nozzle is perpendicular to the center line. There are no uneven angles and heights, but depending on the customer, you need to use a camera-mounted stainless steel column model that is processed by tinta stainless steel. At the same time, after grinding, and processing the stainless steel column model with a tinta stainless steel camera , the end surface is polished. When installing the bottom plate and spot welding the bottom flange and the stainless steel column model with the tinta stainless steel camera will be completed.

Model of stainless steel camera column with stainless steel camera 201 304 316 with camera column height from 2 3 4 5 6 meters, TinTa accepts to process the size of the camera column according to the customer's choice and need to buy.

Workshop for processing stainless steel columns with tinta stainless steel cameras . 

In the workshop for processing stainless steel columns with tinta cameras, it is important to ensure that the bottom flange is perpendicular to the center line of the stainless steel columns with tinta cameras. These ribs are perpendicular to the bottom flange and the line is flat to the straight busbar of the camera.

The welding requirements of the bottom flange for processing the stainless steel column model with the tinta stainless steel camera and the clam plate need to refer to the welding process of the national standard to ensure the quality of the weld, the weld must be beautiful, without pitting and slag.

Processing stainless steel camera installation columns .

In the process of processing this stainless steel tinta camera model, you must be bold and careful. First look at the drawing to determine the direction of the door, then position it according to the size of the drawing. Dimensions include up and down, left and right, and the size of the door frame When plasma cutting or laser cutting, care is taken to ensure that the clearances are aligned. At the same time, the door panels and the lights are directly matched by electric welding.

Welding of door strips for processing stainless steel columns with tinta stainless steel cameras, power strips, and locks. When welding 20mm width door strips, place the door strips 8-10mm apart. Especially when spot welding, the door strips must be close to the light and the welding must be strong. The welding device and locking base are mainly positioned according to the drawings, the lock base is welded in the middle of the door with an error of ≤ ± 2mm. Keep the step at the top and do not extend beyond the camera column.

Dimensions of the camera installation column in tinta stainless steel .

Not only processing stainless steel column models with tinta stainless steel cameras. Can be machined with steel columns. Bend Fork Tracker The fork-bending process is like opening a door, so it needs to be careful and daring. First pay attention to the direction of the door, secondly pay attention to the starting point, thirdly the corner of the fork, the speed of traction, can't be fast or slow, the exit rate is 100%. The quality of galvanized steel directly affects the processing quality of stainless steel columns with tinta stainless steel cameras and monitoring columns.

For galvanized columns, it is mandatory to be galvanized according to national standards. After plating the surface is smooth, without color deviation, and without sagging, heavily sagged piles must be re-plated.

Polished and processed stainless steel column models with tinta stainless steel cameras .

Use a polishing wheel to grind the surface of the galvanized column to ensure that the column surface is smooth, flat, and free of foam. (2) Straightening: Straighten the lamp post and shape the mouth, the convexity of the lamp post should reach 1/1000, the caliber requires a small column ≤ ± 1mm ​​and a high pole ≤ ± 2mm. ( 3 ) Installation of door panels ( 4 ) Treatment of all door panels after galvanizing Monitoring bar treatment includes zinc suspension, leak plating, and zinc deposition in keyholes. (5) When drilling screw holes, the electric drill should be perpendicular to the door plate, the clearance around the door plate is equal, and the door plate is flat. ( 6 ) After the screws are fixed, the door plate must not be loosened and the fixing must be firm to prevent it from falling off during transportation. (7) Powder spraying: spray the lamp post with the door to the spray room, spray the colored plastic powder according to the production plan and then enter the drying room, the temperature and time of keeping the temperature of the drying room must be strict.

Supervising and inspecting the camera column manufacturing plant .

The factory inspection of processing stainless steel column samples with tinta stainless steel cameras is carried out by the quality inspection of the workshop, the inspectors check the processing of stainless steel columns with tinta cameras to check each item. The inspector must record and store and the inspection sheet must be signed by the quality inspector with the workshop. degree before it can be shipped.

Packing and delivery ( can be packed according to customer needs ).

See the previous part of this article about CAMERA INSTALLATION INOX Column SAMPLE .