News & Events

Model of the camera pole and how to build a surveillance poles

How can stainless steel poles be built?

Stainless steel poles. Model mounting stainless steel poles for mounting cameras and processing monitoring poles. Leverage monitoring is regrettably built? All welding discussions of a camera pole sample part and monitoring pole machining must meet the standard requirements of lightning rods and the appearance should be smooth and smooth, free of voids, slags, and slag. soldering, soldering, soldering deficiency, and other defects. On the basis of satisfying the strongest wind load intensity, the displacement (deflection value) of the top of the monitoring rod and its main parts should not be less than 1/200 of its height and the main parts of the bar. Model mounting stainless steel poles for mounting cameras and processing monitoring stainless steel poles.

The main component has the lightning protection result of the camera mount model and the monitoring stainless steel pole processing. The camera's uncharged metal forms an integrated lightning protection pole, which is connected to the ground wire via a ground pin on the housing.

Model of mounting stainless steel poles for mounting cameras and processing monitoring stainless steel poles

The degree of protection of the main unit enclosure shall not be lower than IP55, and the degree of protection of the monitoring rod and its main parts shall meet the requirements of open-air conditions.

The main parts of the camera pole model and the monitoring pole machine can be completed by electric and manual lifting, and the lifting process should be the same, unchanged and peaceful. When the promotion speed is 8 million/min, the motor power should be ≤450W; the right hand twist is ≤40n. M.

The main part of the model of the stainless steel poles for mounting the camera and processing the surveillance stainless steel poles, the surveillance security camera must be equipped with a reliable grounding device and the grounding resistance must be ≤ 4 ohms. The basic examples and dimensions of the main components of the monitoring rod must be determined in accordance with the ground motion intensity, wind load strength, lightning protection track bar, lamp post factory. In Chongqing, the geological conditions and specific requirements are specified by the user. Specific equipment drawings and mandatory structural requirements are available upon request.

The outdoor control switch box of the main component of the camera pole model and the monitoring pole processing should be made of stainless steel, and its appearance should be sprayed with plastic.

What are the reasons why monitoring poles choose high mast lights to use ?

What are the reasons to choose high mast lights?

In fact, the camera pole model and the monitoring pole processing, in addition to solar energy is the most efficient energy, there is still a type of street light that is also energy-saving, that is, LED super high pole lights. Ultra-high LED can be said to save the power and value of high-definition camera monitoring at all times, and eliminate the poverty of manual maintenance. As far as possible, it cannot use renewable energy like solar power, but it can also save electricity.

We want to use the camera mount model and process the surveillance stainless steel poles. First, we should consider the advantages of the 304 201 stainless steel poles model for surveillance camera mounting stainless steel poles and security camera poles processing with the right view. Street lights with excellent application results can achieve energy-saving results. It is possible to combine the 304 201 stainless steel poles model for the stainless steel poles to mount the surveillance camera and process the security camera stainless steel poles with the light pole. LEDs are energy-saving light-emitting diodes that consume very little power and do not lose heat. This is why we can approve its use.

In addition to energy-saving results, ultra-high LEDs can also control the situation and eliminate air pollution. It is beneficial for non-corrupt and non-polluting situations. Its real description is that it has a long service life, convenient monitoring stainless steel poles and high definition camera monitoring value, energy-saving and environmental protection, low maintenance, and good color rendering index.

The light that is considered to be illuminating will be used for street lamps. Therefore, combining the 304 201 stainless steel poles model for the pole-mounted surveillance camera and processing the street light security camera pole  is not an overnight choice, but the value of a high-definition surveillance camera, not only It can be seen that the lighting results of the common urban circuit are good. About the results of using high mast lights, we will introduce to you here.

What are the reasons why the monitoring stainless steel poles chooses the high light pole to use?

What are the reasons to choose a security camera pole with a high light pole ?

In fact, the combination of 304 201 stainless steel poles for surveillance camera poles and security camera pole processing in addition to solar energy is the most energy-efficient, there is still a type of street light that is also energy efficient. , that is, LED ultra-high lamp poles. Ultra-high LED can be said to save the power and value of high-definition camera monitoring at all times, and eliminate the poverty of manual maintenance. As far as possible, it cannot use renewable energy like solar power, but it can also save electricity.

Model combinations of 304 201 stainless steel columns for mounting stainless steel poles for mounting surveillance cameras and processing security camera poles. We want to use LED street lights. First, we should consider the advantages of high voltage LEDs with the right view. Street lights with excellent application results can achieve energy-saving results. LEDs are energy-saving light-emitting diodes that consume very little power and do not lose heat. This is why we can approve its use.

In addition to energy-saving results, ultra-high LEDs can also control the situation and eliminate air pollution. It is beneficial for non-corrupt and non-polluting situations. Its real description is that it has a long service life, convenient monitoring stainless steel poles and high definition camera monitoring value, energy-saving and environmental protection, low maintenance, and good color rendering index.

Light that is considered to be illuminating will be used for street lamps. Therefore, when combining the 304 201 stainless steel poles model for surveillance camera poles and processing security camera poles, street lights are not an overnight choice, but the value of high-definition surveillance cameras, not Only the lighting results of the ordinary urban circuit can be seen as well. About the results of using high mast lights, we will introduce to you here.

The common sense of monitoring pole manufacturers required for monitoring pole installation

What is the common sense required for the installation of monitoring poles ?

Surveillance posts are pole mounts used for outdoor surveillance camera equipment. The ladder usually has a height of 6 meters and a horizontal swing arm of 1 meter. It has many benefits and knowledge in the application.

The monitoring pole includes the value of the spot high-order monitoring column, medium, and low pole lamps. To deal with the surveillance bar equipment, we have to use some standard knowledge to show us the value of the surveillance bar combined with the 304 201 stainless steel poles model for the surveillance camera mounting pole and the security camera column.

Combine the 304 201 stainless steel column model for mounting columns for mounting surveillance cameras and processing security camera columns. Concrete stainless steel poles can be used. The basic bottom steel cage needs to be held tight for the time being to ensure the flat height of the steel bottom and top plate. In other words, Chongqing Lamp Pole Factory uses a degree ruler to measure two basic roof deflection lengths, and it is necessary to observe the bubbles in the middle. It is necessary to monitor the pouring and compacting process of the vertical piles embedded in the block to avoid concrete hollowing.

During the construction process of incorporating the 304 201 stainless steel poles model for mounting columns for mounting surveillance cameras and processing security camera columns, it is recommended to use plastic paper or other materials to seal the hole of the embedded pipe in advance. Each metal vertical pole shall be grounded and its grounding resistance less than 4Ω. Basic data and details of each vertical column are subject to on-site construction requirements.

Model of the camera pole and how to build a surveillance pole. Combine the 304 201 stainless steel column model for mounting columns for mounting surveillance cameras and processing security camera stainless steel poles.

Many people are not clear about stainless steel columns and 304 stainless steel column structures.
See now >  304 stainless steel poles
You are interested in 304 stainless steel columns and stainless steel column prices
Should not ignore this item >  stainless steel pole quotes
When buying stainless steel columns, you need a lot of information.
Information and selling price for comparison. See >  NOX POLES